By default, the two GPIOs are not broken out to the board’s pin headers in order to ensure reliable performance. The version with the ESP32-WROVER module uses ESP32’s GPIO16 and GPIO17 as chip select and clock signals for PSRAM. Most of the ESP32 I/O pins are broken out to the board’s pin headers for easy access. ESP-WROVER-KIT makes development convenient, easy, and cost-effective. This chip enables to use JTAG for direct debugging of ESP32 through the USB interface without a separate JTAG debugger.
Its another distinguishing feature is the embedded FTDI FT2232HL chip - an advanced multi-interface USB bridge. This board features an integrated LCD screen and microSD card slot.ĮSP-WROVER-KIT comes with the following ESP32 modules: Overview ĮSP-WROVER-KIT is an ESP32-based development board produced by Espressif. You can skip the introduction sections and go directly to Section Start Application Development. What You Need Ĭomputer running Windows, Linux, or macOS For the description of other ESP-WROVER-KIT versions, please check Hardware Reference.
This guide shows how to get started with the ESP-WROVER-KIT V3 development board and also provides information about its functionality and configuration options. ESP-WROVER-KIT V3 Getting Started Guide
